Introduction
Monster Energy graphics give instant
credibility to aspiring champions
Under the black plastic, frame and wheels, green hubs and Monster
Energy® graphics-just like the big KX's-the Kawasaki KX™85
Monster Energy allows budding racers to look like their Kawasaki
racing heroes while following in their developmental footsteps.
With this in mind, the KX85 Monster Energy is a perfect choice
for young racers to continue building upon their skills and venture
into the next level of motocross completion.
The KX85 is powered by a liquid-cooled, two-stroke, single-cylinder
84cc engine that churns out race-winning power, and is packed
with high-tech features, such as an Electrofusion-coated cylinder
with a narrow squish band and large volume combustion chamber
to enhance top-end power.
Fuel delivery for is provided by a 28mm Keihin carburetor that
features a crescent-slide to position the needle closer to the
intake ports. The Kawasaki Integrated Power-valve System (KIPS®)
and tuned exhaust pipe contribute to the KX85's tractable power
delivery, which translates into better drive off the corners
and more control for young riders of varying skill levels.
Hard chrome-finished shift fork ends, a thick base on the clutch
basket housing and an additional bushing on the input shaft for
extra durability are all features that make the KX85's smooth-shifting
six-speed transmission really shine.
The KX85 utilizes a high-tensile steel perimeter frame, with
a specially designed gas tank that sits inside the frame, lowering
the fuel load and center of gravity for improved handling yet
another beneficial feature borrowed from KX85's larger siblings.
Long-travel suspension at both ends helps to smooth out the roughest
course for riders of every size and skill level. The 36mm inverted
cartridge front fork has the capability of 18-way compression
damping adjustment. Out back, the spring preload, compression
and rebound damping are all adjustable on the proven UNI-TRAK®
rear suspension system.
Those who race their KX85 Monster Energy edition at designated
events are eligible to receive support from Team Green™,
Kawasaki's amateur racing support program. Each year, Team Green
provides regional support vehicles and highly trained technicians
at more than 100 events, offering technical information and assistance
to those who race Kawasaki products. Kawasaki also offers a comprehensive
contingency program for amateur and professional riders who place
well at designated events.
 |
 |
|
|
Features
Monster Energy Edition
- Special Monster Energy graphics package
- Black bodywork, frame and wheels
- Green hubs highlight the special Monster Energy logos
Liquid-cooled, two-stroke, single-cylinder 84cc Engine
- Lightweight Electrofusion-coated cylinder improves heat transfer
while resisting abrasion and seizure
- Bridges between intake and exhaust ports are machine finished
for less wear and improved reliability
- Liquid-cooling means even-running temperatures and consistent
power output
- Rotor comes with rare-earth magnets the unitized piece
is small, light and more efficient with low inertial moment improves
low-rpm response
- Connecting rod big-end bearing has more rigid cage for improved
durability
- Intake port shape and cylinder skirt allow cooling air into
the crankcase chamber
- Primary gear is secured using a lock-nut to help reduce mechanical
noise
- Metafoam gaskets for the generator and water pump covers improve
sealing
Kawasaki Integrated Power Valve System (KIPS®)
- KIPS system varies exhaust-port height for increased horsepower
and torque at all rpm
- Produces a broad powerband with more low-end torque and mid-range,
while retaining excellent top-end power
- Breather in KIPS cover improves high-rpm and overrun performance
Clutch
- Thick base clutch hub rides on needle bearings for smooth action
- Large clutch plates are 119mm in diameter for durability and
control
- Clutch-release lever ratio is designed for light clutch lever
action
- Clutch plate service cover simplifies maintenance and utilizes
a metal-carbon composite gasket
28mm Keihin PWK carburetor
- Large crescent slide carburetor positions the needle closer
to intake ports for excellent throttle response and improves
power
- Adjustable for various conditions
Airbox
- Large right-side cutout improves airflow for increased power
- Reusable foam air filter
Exhaust System
- Features large-diameter O-ring and groove on exhaust pipe for
improved durability and easy installation
- Aluminum silencer is re-packable like larger KX models
Six-speed Transmission
- Positive shifting action and rugged durability
- Fifth and sixth gears on the input shaft ride on bushings for
added reliability
- Shift forks are hard chrome finished to resist wear and seizing
- Convenient oil level window
- Bushings on the second, third and fourth gears on the output
shaft increase durability
High-tensile Steel Perimeter Frame
- Wide footpegs for better control, made of cast steel for strength
- Thick footpeg mounting brackets withstand today's rigorous
tracks
- Engine and chassis bolts have rust-resistant coating
Fuel Tank
- Gas tank design lowers center of gravity for improved handling
UNI-TRAK® Rear Suspension
- The swingarm uses large cross-section beams for improved rigidity
and control
- Cast-aluminum drive chain adjuster sections for easy chain
adjustments
- Shock is fully adjustable for compression and rebound damping
and spring preload
36mm Inverted Cartridge Fork
- Inverted forks are rigid, providing better steering response
and control
- Compression damping is 18-way adjustable
- Aluminum upper fork tubes measure 49.5mm in diameter for flex-free
performance
Front and Rear Disc Brakes
- Front brake lever shape offers better feel
- Forged-aluminum rear brake pedal is strong, lightweight and
features two seals at the pivot for smooth operation and increased
durability
- Strong braking power is achieved with minimal effort
Front and Rear Wheels
- Rear hub features two wheel bearings on the drive side of the
hub for durability
- Rear-axle diameter is large for more rigidity
Graphics
- Aggressive Kawasaki Lime Green and Black graphics just like
larger KX models
|
|
|
Technical Specifications
Engine: Two-stroke single with
KIPS®
Displacement: 84cc
Bore x stroke: 48.5 x 45.8mm
Cooling: Liquid
Carburetion: Keihin PWK28
Induction: Crankcase reed valve
Compression ratio: 10.0:1 (low speed) 9.2:1 (high speed)
Ignition: Digital CDI
Transmission: Six-speed
Final drive: Chain
Frame: High-tensile steel perimeter design with subframe member
Rake / trail: 27 degrees / 3.5 in.
Front suspension / wheel travel: 36mm inverted telescopic cartridge
fork with 18-way compression damping / 10.8 in.
Rear suspension / wheel travel: UNI-TRAK® single-shock system
with 4-way compression and 16-way rebound damping, plus adjustable
spring preload / 10.8 in.
Front tire: 70/100x17
Rear tire: 90/100x14
Front brake / rear brake: Hydraulic disc / Disc
Overall length: 71.7 in.
Overall width: 28.9 in.
Overall height: 41.5 in.
Ground clearance: 13.4 in.
Seat height: 33.1 in.
Curb weight: 152.1 lbs.
Fuel capacity: 1.5 gal.
Wheelbase: 49.4 in.
Color: Ebony
* Price and specifications subject to change
|
|
